Scooter Maintenance
Scooter maintenance is pretty important. It's even more important than on a car because the engine has to work harder and component failure can more easily lead to loss of control.
Perhaps the most important and easiest item of maintenance is to regularly check the oil level and change the oil at frequent intervals. I think changing the oil at least every 1000 miles is a good idea. The oil capacity is less than 1 liter and so an oil change costs about $3 and takes about 5 minutes. It's cheap insurance to keep your engine running. My manual recommends changing the transmission oil every 2000 miles or 6 months. Since it only takes about about 100ml of oil (which costs under $1) and takes a couple of minutes to do, don't skimp on transmission oil changes. I use Castrol 10-30W engine oil and Castrol 80/90 transmission gear oil. Which oil you use is less important than how often you change it, though I'd probably avoid using pure synthetic oil in a scooter, especially during the break in period. Once you have several thousand miles on the engine, a synthetic blend may be OK, but you should still change the oil regularly.
With any luck your "manual" will have a maintenance schedule in it, but if it doesn't here's the very minimum that you should do:
Every 250 miles or every month:
- Check engine oil level
- Check tire pressure
- Check lights and horn
- Check battery level
Every 1000 miles or every 6 months
- Change engine oil
- Check tires for wear
- Check brakes and throttle operation. Lubricate cables if required
- Check all screws nuts and bolts and tighten. Especially check muffler and exhaust fasteners
Every 2000 miles or every year
- Change the transmission oil.
- Check and adjust valve clearance
- Clean air cleaner
- Check and clean (or replace) spark plug
- Check brake linings.
- Check/clean/lubricate brake and throttle cables.
- Check CVT drive belt for wear and cracks
- Check wheel and steering bearings
Though not exactly maintenance, I'd recommend carrying a basic tool kit at all times. That would include the following items:
- 3/8" metric socket set
- Flat blade and Phillips head screwdrivers
- Roll of electrical tape
- Roll of duct tape
- Pair of pliers
- Pair or wirecutters
- Flashlight (LED type)
- Short length of wire
- Set of metric wrenches
- Short length of fuel/vacuum hose